![]() ![]() Diode test: Range/resolution 2.00 V / 0.001 V.Accuracy Beeper on 250 Ω detects opens or shorts of 500 μs or longer. Continuity: Range/resolution 600 Ω / 1 Ω.AC millivolts¹ True RMS: Range/resolution 600.0 mV / 0.1 mV.Auto volts: Range/resolution 600.0 V / 0.1 V.DC millivolts: Range/resolution 600.0 mV / 0.1 mV.Battery life: 400 hours typical, without backlight.Battery type: 9 volt Alkaline, IEC 6LR61.Bar graph: 33 segments, updates 32 per second.Display Digital: 6,000 counts, updates 4 per second.Fuse for A input: 11 A, 1000 V FAST Fuse (Fluke PN 803293).Maximum voltage between any terminal and earth ground: 600 V.If dropping tools off, we encourage you to print and fill out ➜ this form to bring along with them. Temperature Range/Resolution: -40☏ to 752☏ / 0.2☏.Office Hours: Monday-Friday 7:30 am – 4:00 pm Frequency is DC coupled, 45 Hz to 5 kHz for AC current.Ģ. Frequency is AC coupled, 5 Hz to 50 kHz for AC voltage. Temperature uncertainty (accuracy) does not include the error of the thermocouple probe.Ģ. All AC voltage ranges except Auto-V/LoZ are specified from 1% to 100% of range. Maximum voltage between any terminal and earth groundĦ kV peak per IEC 61010–1 600 VCAT III, Pollution Degree 2ĭigital: 6,000 counts, updates 4 per secondīeeper on 250 Ω detects opens or shorts ofĢ0 A continuous overload for 30 seconds maxġ. Compatible with optional magnetic hanger (ToolPak™) for hands free operation.Compact ergonomic design for one-handed operation. ![]() Min/Max/Average with elapsed time to record signal fluctuations.Resistance, continuity, frequency and capacitance.Measures 10 A (20 A overload for 30-seconds).True RMS for accurate measurements on non-linear loads.Large white LED backlight to work in poorly lit areas.Low input impedance: helps prevent false readings due to ghost voltage.AutoVolt automatic AC/DC voltage selection.VoltAlert™ technology for non-contact voltage detection.AutoVolt and Low Input Impedance modes provide faster, more accurate readings.VoltAlertTM technology gives you fact, go/no go non-contact voltage detection.The large white LED backlight helps you work in poorly lit areas.This is the ideal meter for your electrical work because: We test our 117 Multimeters for safe use in CAT III 600 V environments. With its easy-to-use design, the Fluke 117 will save you time, allowing you to move from job to job with ease.Įngineered and Tested with Your Safety on the Job in Mind The Fluke 117 provides Min/Max/Average readings, measuring frequency and capacitance. In fact, users around the world have said their 117 is an investment in accuracy. With its integrated non-contact voltage detection and the AutoV/LoZ function preventing false readings caused by ghost voltage, the Fluke 117 Electrician's Multimeter is the ideal multimeter for electricians. ![]()
0 Comments
Leave a Reply. |